For many decades, popcorn texture was the standard way to finish the ceiling of a room, and thousands of homes in the Reston VA area still have this outdated style. Most new homes are now finished with flat ceilings, and painted ceilings are have become popular. Fortunately, this type of popcorn texture on many ceilings can be completely removed and the ceilings can be re-finished to create a more modern appearance.
There are a few Painters in Northern VA that offer popcorn ceiling removal, however, some homeowners prefer to tackle the project themselves. While the procedure is not so complex for a beginner, be aware it is messy. For those who have not tried it before, please realize that working with your arms above your head for extended periods of time can be somewhat difficult.
Begin by protecting your room with plastic sheeting, which can be bought at any paint or home improvement store. First cover the floor, then tape plastic to the walls, right below the ceiling or the crown molding. If you are planning to paint the walls, the plastic process can be modified, but it is still important to contain the dust.
The key to efficiently removing popcorn texture is to get it wet. Most people prefer to do this with a pump sprayer, which can be controlled more easily. If you use water, spray small areas of about 4-5 square feet at a time. Spraying the entire ceiling would not be productive because some areas would dry before you had the chance to remove the texture. Some people have tried to use paint to wet the texture but this technique isn't something that we would recommend. Nevertheless, the goal is to wet the popcorn so that it is soft enough to remove.
Once the popcorn ceiling texture is wet, scrape it off using a 10 inch drywall finishing blade. The larger blade will help increase the surface area that is being scraped. Provide long scraping passes and try to avoid scraping immediately above your head. Continue to pass the sections of the drywall ceiling until all the popcorn texture is removed. Remove and discard the plastic protection.
Before you paint, your ceiling will probably need some repair. Use wide putty knife to apply drywall compound to any places where the ceiling has been damaged or otherwise has nail holes or imperfections. Our Drywall Mechanics utlize an electric drywall sander that comes with a drywall dust collector. A pole sander is less expensive, however, also requires additional manual labor. In any event, it's important to sand the areas that have been re-finished.
Now you are ready to paint! Begin by priming the ceiling with a drywall primer and then paint your ceiling with two coats of latex based flat paint.
Davinci's Painting provides popcorn ceiling removal, and we are also experienced and trained to deal with lead paint and asbestos issues. We work in the Washington DC Area, including Reston, Fairfax, Vienna, Falls Church, Arlington, and Alexandria. Call us for a free estimate regarding popcorn ceiling removal.